UltiMaker Print Head Shafts (2+C) 80-117273

€43.73excl. btw

€52.91incl. btw

UltiMaker 2+ Connect print head shaft set (80-117273). Includes two precision-ground 6 mm chrome steel spindles (320 mm and 300.5 mm) to restore smooth, low-friction X/Y motion and industrial accuracy,

Niet op voorraad

2–3 weken

Beschrijving

Replacement print head shafts for UltiMaker 2+ Connect

The print head shafts, also known as spindles, are the precision-ground internal rails that guide the movement of the print head across the X and Y axes. These shafts are critical to the mechanical accuracy of the UltiMaker 2+ Connect, as they provide the smooth, low-friction surface required for the print head's linear bearings. Over time, these shafts can become scratched, pitted, or slightly bent due to accidental collisions or a lack of lubrication, which can result in "banding" on prints or increased mechanical resistance.

This replacement set is manufactured from high-grade hardened steel with a chrome finish to ensure maximum durability and minimal wear. By replacing worn shafts, you restore the fluid, silent motion of the print head, ensuring your 3D models maintain the crisp detail and dimensional accuracy expected from an UltiMaker machine.

Wat zit er in de verpakking?

1x X-axis shaft (320 mm): The longer 6 mm diameter spindle for the horizontal travel.
1x Y-axis shaft (300.5 mm): The 6 mm diameter spindle designed for the depth travel.

Compatibiliteit:

This shaft set is designed specifically for the following model:

UltiMaker 2+ Connect