UltiMaker Limit Switch Pack (2+C) 80-164317

Limit switch pack for UltiMaker 2+ Connect

The limit switch pack is an essential maintenance kit designed specifically for the UltiMaker 2+ Connect. These precision micro-switches act as the "home" sensors for the X, Y, and Z axes, allowing the printer to accurately establish its coordinate system before every print. Over time, the internal mechanical contacts can wear down or the metal levers can become fatigued from thousands of homing cycles. Replacing these switches ensures that your printer can calibrate its position with the high repeatability required for consistent part accuracy.

This pack provides a complete set of replacement sensors with cable lengths tailored to the internal chassis of the 2+ Connect. By having a full set of spares, you can quickly resolve homing failures or "limit switch stuck" errors, keeping your production line moving with minimal downtime.

Wat zit er in de verpakking?

• 1x X-axis L530: The dedicated homing sensor for the horizontal print head travel.
• 1x Y-axis L710: The long-reach sensor used to define the home position for the gantry's depth movement.
• 1x Z-axis L200: The short-lead sensor used to detect the vertical home position of the build plate.

Compatibiliteit:

This specific set of cable lengths is designed for the following model:

• UltiMaker 2+ Connect